UniPOS FS5200P Уред за напојување со електрична енергија
9,730.00 ден со ДДВ
The Power Supply Device FS 5200P is an autonomous power supply source of combined type with a backup battery and charging device. – input voltage (187-253) V AC, 50Hz;
– maximum consumption capacity 120VA;
– output voltage (17-28)V DC;
– output current (in the presence of main power supply) – up tp 3.5A (continuous);
– output current (in absence of main power supply and fully charged back-up battery) 3.5A
up to 2h;
– back-up battery – 2x12V DC / 7Ah.
The Power Supply Device FS 5200P is an autonomous power supply source of combined type with a backup battery and charging device. Its function is to provide continuous power supply for the evices in the signaling installations, fire alarm installations and automation of the fire alarm quipment. In the event of a Fault condition (no mains supply, discharged or disconnected backup attery, burnt fuse) it switches its relay output. For a light signaling of the various conditions are used reen and yellow LEDs located on the front panel.
The device is in compliance with the European Standard EN 54-4.
Input voltage: (187-253)V AC, 50 / 60 Hz
Maximum installed capacity: 120 VA
Output voltage: (17-28)V DC
Output current (in the presence of mains power supply): up to 3,5 A (continuous)
Output current (in the absence of mains power supply and fully charged backup battery): 3,5 A (up to 2 h)
Over-discharging protection below: 17V DC
Output for Fault condition: Relay potential free switching 1 A / 30V DC
Backup battery: 2x12V DC / 7 Ah
Dimensions: 330x305x80 mm
Weight (excluding the backup battery): 4,1 kg
Operating temperature: minus 5oC to 40oC
Relative humidity: (92±3)% at 40 oC
Degree of protection: IP 30